Commissioning the Plug Load Control device - Radiar AR10

Commissioning Steps for RADIAR AR10

1. Turn on the Radiar AR10 device.
2. The device will enter pairing mode, ready for commissioning.
3. Click on the ‘+’ button in the app.
4. Select the ‘Add Device’ option.
5. Tap on ‘Tap here’, and the device will appear in the list.
6. Press the ‘+’ button next to the detected device.
7. The device will be commissioned successfully
8. Rename the device as Radiar AR10(Plug Load Control) if desired.
9. Click ‘Ok’ to save the name

Note: Ensure that the device settings are set to Relay Mode.

Follow the given steps for setting the Device to Relay Mode

1. Click on the settings icon next to the device Radiar AR10 (Plug Load Control).
2. On the Device Settings page, select ‘Additional Settings’.
3. Navigate to ‘Output Channel Settings’.
4. Choose the ‘Relay’ option.
5. The device settings will now be set to Relay Mode.

The device can also be accessed via web by logging into WiseconnectWeb using the same User Id and password.

The steps to login to the Web app is as follows:

User can login using the same credentials used to login to the Lumos Controls mobile app. To login to the Web app:

1. Open the Web application link. Please find a link pointing to the "lumos" Server"
    https://lumos.wisilica.com/wiseconnect/report-ui/login
2. In the login page, enter your User name and Password (Created and used to login to the Lumos Controls mobile app)
3. Click on the 'Sign In' button to login. By default, the Reports tab will be displayed
    

        4. Click on the ‘Devices’ tab

        5. The devices commissioned in the account will be listed.