Control Lumos system from AV keypad

Modified on Tue, 6 May at 3:47 AM

Follow these steps to configure AV system and Enor EU device so that AV keypad buttons can control lighting devices:

Open the Enor EU app
Navigate to:
Device Settings → AV Integration Settings → Control Lights from AV Keypad

3. Enor EU provides option to configure maximum of 16 AV buttons to control Lumos devices

with required actions

4. By default, all 16 button config slots will be displayed and can be configured based on the

need.

The below given steps can be followed to configure the buttons in an AV Keypad

5. Name the AV keypad button to be used (e.g., “Presentation Start”)

Default names shall be Button-1, Button-2…, Button-16

On pressing the button name, the app displays a pop-up text box titled "AV button"
Type the required name and press the "OK" button

Note: The character limit can be 20 including spaces and it should not be blank

6. Enter the AV Command that will be sent from the AV system to Enor EU.

Note the following points:

The command shall be of 32 characters maximum
A checkbox (checked by default) lets users choose whether to add a carriage return <CR> at the end of the command, which is then shown in the input box.

6. Assign a lighting action to this command (e.g., "Set lights to 3000K at 50% brightness").

There will be options to select - the scene or group or no action

a. When scene is selected, the required scene can be selected from the list of scenes under the network.

For more information on how to create and configure scenes, click here.

b. When a group is selected, a group must be chosen along with the desired action—either ON (default) or OFF.

For more information on how to create and configure scenes, click here.

c. When no action is selected, no operation shall be executed upon pressing the button