- Connect Enor EU gateway to the AV controller via UART serial communication port.
- Choose the zone from the top right corner in the app into which you want to commission the device
- Go to the 'Devices' tab, then Click on the '+' button and choose the option 'Add Device'
4. Power/Repower the Enor EU gateway and it will come to commissioning mode for next 3mins.
5. Click on 'Tap here' and the device will be listed
6. Tap on ‘+’ icon against the Enor EU tile to add in to the system.
7. Select and save the time zone where the gateway is installed (Location is optional).
8. Select and save where the gateway to be pointed.
Note: Use Edge option only if you are using Iris E Edge device.
9. Configure the UART parameters of the AV system in app for the Enor EU to start communicating with the
AV system
10. Configure the Wi-Fi/ Ethernet with SSID and password to connect Gateway to internet. It also provides
option to configure a Static IP if needed.
The Enor EU will be paired to the Lumos app
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article