Usage duration data is represented either in hours or percentage of a day (24 hours). A floor/zone/group/device-based graph and time-based graph are displayed based on the filter selection in the descending order of usage. By default, the data will be represented in Hours and floor-based and time-based graphs of the building shall be displayed. Using filters, a user can drill down the data to Floor, Zone, or Device level.
There is the option to view data in either the total duration of usage or as a percentage. Percentage of usage duration shall be computed by considering the duration for which the device was in use and the time frame for which this data is to be represented.
The information about the building's total hours of utilization, most utilized floor(s) and its duration of usage, least utilized floor(s), and its duration of usage shall be displayed by default if no filter is applied. If a floor is selected from the filter, data about the floor's total hours of utilization, most utilized zone(s)of that floor and its duration of usage, least utilized zone(s) and its duration of usage shall be displayed. If a zone is selected from the filter and
- the groups tab is chosen, data about the zone's total hours of utilization, most utilized group(s) of that zone and its duration of usage, least utilized group(s), and its duration of usage shall be displayed.
- the devices tab is chosen, data about the zone's total hours of utilization, most utilized device(s) of that zone and its duration of usage, least utilized device(s), and its duration of usage shall be displayed
If a group is selected from the filter, data about the group's total hours of utilization, most utilized device(s)of that group and its duration of usage, least utilized device(s), and its duration of usage shall be displayed. If a device is selected from the filter, only its time-based analysis graph will be shown.
A floor/zone/group/device shall be chosen from the graph or from the filter to view its time-based analysis and zone/group/device-based analysis.
The limit of usage duration configured for each floor/zone/group/device shall be indicated on the graph for each floor/zone/group/device in the respective graphs as configured in Report settings.
You can also visit the following sections for more information:
To know on how values are calculated for the Device Usage Reports, click here
To know the purpose of Occupancy Reports, click here
To know the purpose of Energy Consumption Reports, click here
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article