Create Device Schedules

1. Go to the 'Devices' tab
2. Click on the  icon of the light device for which schedule needs to be created
3. Choose 'Individual schedule setting'
   
4. To create a Schedule, click on the '+' button, enter the schedule name and click on the 'Ok' button
        
5. Open the new Schedule created. By default, the 'Date' option will be selected
6. Choose the 'Date' option if the schedule is to be activated on a particular date and time. Select the start/end date and time. Also, select the scenes to be activated during schedule start & end
    
7. Choose the option 'Repeat' if the schedule is to be repeated on multiple days. Select the days on which the schedule must be activated. Select the start/end date and time. Also, select the scenes to be activated during schedule start & end 
    
8. Enable the 'Manual Override' option to configure the duration after which the light device should respond to the schedule if a user manually controlled it while it was performing a scheduled operation
   1. The default value for this interval is 120 min and can be configured between 0-120 min

You can also visit the following sections for more information:
To know how to  rename a Device Schedule, click here
To know about Motion based automation using Wireless Sensor, click here
To know how to configure 3rd party wired motion sensors, click here
To know how to implement Daylight harvesting, click here
To know about Daylight harvesting using Open Loop mode, click here
To know about Daylight harvesting using Closed Loop mode, click here
To know about Daylight harvesting using Custom mode, click here
To know about Automated Demand Response, click here
To know about Human Centric Lighting, click here