Create a Scene Schedule using Date option

1. Go to the 'More' tab
2. Choose the 'Scene Schedule' option
   
3. To create a Schedule, click on the '+' button, enter the schedule name and click on the 'Ok' button
   
4. Open the new Schedule created. By default, the 'Date' option will be selected
5. Choose the 'Date' option if the schedule is to be activated on a particular date and time 
   1. Select the start date and time
   2. In 'Start Action', choose the scene to be activated when the schedule starts
      
6. Click on the 'Save start action' button
7. Select the end date/time and the scene to be activated when the schedule ends
            
8. Enable the 'Manual override' option to configure the duration after which the light devices in the schedule should respond to the schedule if someone manually controlled during a scheduled operation
   1. The default value for this interval is 120 min and can be configured between 0-120 min
      Note: During this period the lights will not respond to the scheduled operation

You can also visit the following sections for more information:
To know how to create a Scene Schedule using Repeat option, click here
To know about Motion based automation using Wireless Sensor, click here
To know how to configure 3rd party wired motion sensors, click here
To know how to implement Daylight harvesting, click here
To know about Daylight harvesting using Open Loop mode, click here
To know about Daylight harvesting using Closed Loop mode, click here
To know about Daylight harvesting using Custom mode, click here
To know about Automated Demand Response, click here
To know about Human Centric Lighting, click here