Create a Scene Schedule using Repeat option

Created by Usha Nandhini, Modified on Thu, 18 Jan at 12:41 AM by Nishin Menon

Go to the 'More' tab
Choose 'Scene Schedule'
To create a Schedule, click on the '+' button, enter the schedule name and click on the 'Ok' button
Open the new Schedule created. By default, the 'Date' option will be selected. Choose this option if the schedule is to be activated on a particular date and time
Select the 'Repeat' option to create an automated schedule to be repeated on multiple days
1. Select the days on which the schedule must be activated.
Click on the 'Next' button. Select the start time. In 'Start Action', choose the scene to be activated when the schedule starts
Click on the 'Save start action' button
Choose the end time and the scene to be activated when the schedule ends
Enable the 'Manual override' option to configure the duration after which the light devices should come back as per the schedule if there were a manual operation on the devices while the scheduled operation was in progress
1. The default duration for the override is 120 min, and you can customize it between 0-120 min
  Note: During this period, the lights will not respond to the scheduled operation
You can also visit the following sections for more information:
To know how to rename a Scene Schedule, click here
To know about Motion based automation using Wireless Sensor, click here
To know how to configure 3rd party wired motion sensors, click here
To know how to implement Daylight harvesting, click here
To know about Daylight harvesting using Open Loop mode, click here
To know about Daylight harvesting using Closed Loop mode, click here
To know about Daylight harvesting using Custom mode, click here
To know about Automated Demand Response, click here
To know about Human Centric Lighting, click here