Configure 'Device Power Settings' prior to device commissioning

1. Choose the zone from the top right corner of the app
    
2. Go to the 'Devices' tab in the app
3. Click on the '+' button and choose the option 'Add Device'
   
4. Click on the option 'Commissioning Settings' and choose 'Device Power Settings'
   
5. Enter the power rating of the devices
   1. The default value will be 9 watts and can be configured between 1-200 watts
6. Configure the time interval at which the power consumption data must be tracked 
   1. The default value will be 5 min and can be configured between 1-254 minutes

You can also visit the following sections for more information:
To know how to commission Controllers, Ldrives, and Dimmers, click here
To know how to commission Sensor, click here
To commission Catron IV, click here
To commission Gateway in Wi-Fi mode, click here
To commission Repeaters, click here