Configure 'Input Sensor Settings' prior to device commissioning

1. Choose the zone from the top right corner in the app 
   
2. Go to 'Devices' tab in the app
3. Click on the '+' button and choose the option 'Add Device'
   
4. Click on the option 'Commissioning Settings' and choose 'Input Sensor Settings'
   
5. Choose the channel (Channel 1 or Channel 2) to which motion/daylight sensor is connected to the device and select the option Motion Sensor / Daylight Sensor from the drop down menu
   
6. Choose a voltage value beyond which when the input comes, the device should consider it as a  motion/ daylight sensor trigger 
   1. The default value will be 1V for motion sensors and 5V for daylight sensors
   2. This value can be customized between 1V-10V
   3. When daylight sensor is chosen, an additional option to specify a range of voltage values will be available as well

You can also visit the following sections for more information:
To configure 'Device Configuration Settings' prior to device commissioning, click here
To know how to commission Controllers, Ldrives, and Dimmers, click here
To know how to commission Sensor, click here
To commission Catron IV, click here
To commission Gateway in Wi-Fi mode, click here
To commission Repeaters, click here