Configure 'Output Channel Settings' for Ldrive prior to device commissioning

1. Choose the zone from the top right corner of the app 
2. Go to the 'Devices' tab in the app
3. Click on the '+' button and choose the option 'Add Device'
4. Click on the option 'Commissioning Settings' and choose 'Output Channel Settings'
5. Click on the tab 'Driver' to configure the output channel settings for controllers
   

6. Single Channel + Relay

   1. Choose this as the output channel mode if only one channel of the driver is connected

   2. The second channel will act as an external relay input

   3. This mode will support On/Off and intensity control of the device.

7. Color Tuning

   1. Choose this as the output channel mode if both channels of the driver are connected and when connected to tunable LEDs.

   2. This mode will  support On/Off, intensity, and CCT control

8. 2 Single Channels

   1. Choose this as the output channel mode if both channels of the driver are connected and can independently control the intensity of both the channels

   2. This mode will support On/Off and intensity control for each of the channels.

You can also visit the following sections for more information:
To configure 'Input Sensor Settings' prior to device commissioning, click here
To know how to commission Controllers, Ldrives, and Dimmers, click here
To know how to commission Sensor, click here
To commission Catron IV, click here
To commission Gateway in Wi-Fi mode, click here
To commission Repeaters, click here