Radiar DP5 is a 5 channel constant voltage dimming module. It provides excellent color adjustment performance and is based on manual input/automated control to adjust LED light color and brightness. The device has 11 profiles which can be selected as per the use case.
Note: The required PWM profile has to be selected prior to the commissioning of the device. Once the commissioning is done, the PWM profile cannot be changed. User cannot edit the profile once commissioned, but can be viewed the type of profile chosen from the profile settings.
Commissioning the Device
Devices page > Add Device > Commissioning settings > PWM Profile > Select the desired PWM profile
The different PWM profiles for Radiar DP5 are as follows:
1 Dimmer
Single Channel Intensity controller
This profile is used to control the intensity of one dimmable LED strip.
This profile shall be represented only as a parent (without any child) with the
following controls - ON/OFF & Intensity control of the channel.
2 Dimmer
One parent device with two independent child devices.
This profile has a parent control and two corresponding child controls.
The parent shall have the following controls - ON/OFF control & Intensity control of the channel – which will simultaneously control intensity of all the child devices.
Each child device shall have the following controls - ON/OFF control for that child & Intensity control of the channel – which shall control intensity of that particular child device
3 Dimmer
One parent device with three independent child devices.
This profile has a parent control and three corresponding child controls.
The parent shall have the following controls - ON/OFF control & Intensity control of the channel – which will simultaneously control intensity of all the child devices.
Each child device shall have the following controls ON/OFF control for that child & Intensity control of the channel – which shall control intensity of that particular child device.
4 Dimmer
One parent device with four independent child devices.
This profile has a parent control and four corresponding child controls.
The parent shall have the following controls - ON/OFF control & Intensity control of the channel – which will simultaneously control intensity of all the child devices.
Each child device shall have the following controls ON/OFF control for that child & Intensity control of the channel – which shall control intensity of that particular child device.
5 Dimmer
One parent device with five independent child devices.
This profile will have a parent control and five corresponding child controls.
The parent will have the following controls - ON/OFF control & Intensity control of the channel – which will simultaneously control intensity of all the child devices.
Each child device will have the following controls ON/OFF control for that child & Intensity control of the channel – which shall control intensity of that particular child device.
1 CCT
The profile can be used to control the intensity and CCT of a tuneable LED strip.
The profile is represented only as a parent with the following controls - ON/OFF control for the device; Intensity & CCT control of the channel.
2 CCT
The profile can be used to control the intensity of 2 tuneable LED strips.
The DALI parent will have the following controls -
ON/OFF control for the parent & Intensity control of the channel –
which can simultaneously control intensity & CCT of all the child devices.
Each DALI child device will have the following controls - ON/OFF control for that child
& Intensity & CCT control of the specific child device.
RGB
The profile can be used to control the intensity and color of RGB LED strip.
This profile will be represented only as a parent with following controls - ON/OFF control for the device & Intensity control of the RGB – to select a color.
RGBW
The profile can be used to control the intensity and color of RGBW LED strips.
This profile will be represented only as a parent with following controls - ON/OFF control for the device & Intensity control of the RGBW
- Intensity control for White component – to adjust the intensity of white component
The overall intensity of white component will be the product (or percentage) of the both the common intensity and White intensity sliders. i.e., if both sliders are at 100% - then white component will lit in its max intensity. If one slider is at 50% and other at 100%, then the white component will be lit at 50% (50% of 100% = 50%)
- RGB color control – to select a color
RGB/CCT
The profile can be used to control the intensity and color of RGBCCT LED strips.
This profile will be represented only as a parent with following controls - ON/OFF control for the device & Intensity control of the last adjusted component (RGB or CCT).
CCT control – to adjust the CCT
RGB color control
Note: In RGB/CCT profile, only either RGB or CCT shall be lit at a time. When RGB is adjusted, the CCT component shall be OFF and vice versa.
RGB&CCT
The profile can be used to control the intensity and color of RGBCCT LED strips.
This profile will be represented only as a parent with following controls - ON/OFF control for the device & Intensity control of the RGB&CCT
Adjusting the intensity slider shall automatically adjust the CCT intensity and RGB intensity sliders in tandem.
- Intensity control for CCT component
- CCT control – to adjust the CCT
- Intensity control for RGB component
- RGB color control
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article