Steps to automate lighting with Motion sensors

1. Install light devices and motion sensors in the location where you want to automate lighting with motion sensors
2. Commission the installed light devices and motion sensors
3. Configure settings for the motion sensor to define how it should send a trigger on detecting motion
4. Associate the motion sensor to the light device that should respond to the motion sensor trigger
5. Configure settings for the light device to define how it should respond to the motion sensor triggers
6. Add the light devices and the motion sensor to a group if you want multiple light devices to respond to the motion sensor triggers
7. Configure Motion sensor settings for the group to define how a group of lights should respond to the motion sensor triggers
   
   

You can also visit the following sections for more information:
To know how to configure Motion sensors Radiar SD10, Cyrus F, Cyrus AM and Cyrus AP for automated lighting, click here
To know how to configure 3rd party wired motion sensors, click here
To know how to implement Daylight harvesting, click here
To know about Daylight harvesting using Open Loop mode, click here
To know about Daylight harvesting using Closed Loop mode, click here
To know about Daylight harvesting using Custom mode, click here
To know about Automated Demand Response, click here
To know about Human Centric Lighting, click here