Commission Catron IV

1. Choose the zone from the top right corner of the app into which you want to commission the device
2. Commission the device by scanning the QR code by following the below steps:
   1. Go to the 'Devices' tab
   2. Click on the '+' button and choose the option 'Scan QR code'
   3. Scan the QR code on the device with the app and click on the option 'Add Now'
      
3.  Choose if the switch should act as 'Double Rocker' or 'Single Rocker'
   
   
4. You can also put the device in pairing mode by:
   1. Long pressing on any of the buttons for 10 seconds
   2. short press for 2 seconds
   3. another long press for 10 seconds
   4. and a short press for 1 second
      
      
5. Go to the 'Devices' tab
6. Click on the '+' button and choose the option 'Add Device'
7. Click on 'Tap here' and the device will be listed
   
8. Press '+' button corresponding to the device and the device will be successfully commissioned
   
   
   
   

You can also visit the following sections for more information:
To customize the configuration of Catron IV, click here

To commission Gateway in Wi-Fi mode, click here
To commission Repeaters, click here