Configure the 'Input Sensor Settings' of Radiar AR10 or AF10

'Input Sensor Settings' come into relevance when an AC-powered motion or daylight sensor is connected to the input channel of a controller or a driver

You can use this setting to configure the voltage level above which input is considered a sensor trigger

1. Go to the 'Devices' tab
2. Click on  icon of the device
3. Select the option 'Additional Settings' and choose 'Input Sensor Settings'
   
4. Choose the channel (Channel 1 or Channel 2) to which motion/daylight sensor is connected and select the option motion/daylight sensor from the drop down menu
   
5. Choose a voltage value beyond which when the input comes, the device should consider it as a  motion/ daylight sensor trigger 
   1. The default value will be 1V for motion sensors and 5V for daylight sensors
   2. This value can be customized between 1V-10V
   3. When daylight sensor is chosen, an additional option to specify a range of voltage values will be available as well

You can also visit the following sections for more information:

To know how to commission Sensor, click here
To commission Catron IV, click here
To commission Gateway in Wi-Fi mode, click here
To commission Repeaters, click here