Create a Group using the Web application

All the Groups created and configured in the Lumos control mobile app will be listed under ‘Groups’ tab. We can also create new Groups using the Web application. To create a Group using the Web application:

1. Open the 'Groups' tab
2. Click on the '+' button on the bottom right corner
3. Enter a name for the Group and select a thumbnail image
   
   
   
4. Click on the   button
5. Select the devices to add to the Group
6. For adding DALI drivers to the Group, click on the corresponding DALI controller. Select the required Drivers from the list of Drivers connected to the DALI controller and click on the ‘Add’ button
   
7. Click on the ‘Next’ button on the bottom right corner 
   
   
   
8. The Sensors added to the Zone will be displayed under the ‘Motion Sensor’ and ‘Daylight Sensor’ tabs. From these tabs, select the Sensor to be added as Motion or Daylight Sensor
   
9.  Click on the ‘Create Group’ button
10.  The Group can be controlled using a Gateway commissioned in the same active Zone. The intensity and CCT can be controlled using the Controls ( ) icon corresponding to the device. It can be turned On and Off via ‘ON’ and ‘OFF’ buttons
    
    
    You can also visit the following sections for more information:
    To create a Space using the Web application, click here
    To create a Scene Schedule using the Web application, click here
    To create a Building using the Web application, click here
    To know about the working of the DALI Emergency Lighting System, click here
    To know about the Device Reachability feature of the Web application, click here