Configure AC powered daylight sensors connected to the input channels of Radiar AR10, Radiar AF10 or Ldrive 36W, Ldrive 60W drivers for daylight harvesting

1. Go to the 'Devices' tab
2. Click on the  icon of the device
3. Select 'Additional Settings' and choose 'Input Sensor Settings'
      
4. Choose the channel (Channel 1 or Channel 2) to which the daylight sensor is connected and select the 'Daylight Sensor' option from the drop down menu
    
   
   
5. Choose a voltage value beyond which when the input comes, the device should consider it as a  daylight sensor trigger 
6. The default value will be 5V and can be customized between 1V-10V
7. Choose the option 'Range' and define a range of voltage values 

Note: The configuration of Daylight harvesting mode will be available for Radiar AR10, Radiar AF10, Ldrive 36W and Ldrive 60W drivers only, if the option Range is chosen.

You can also visit the following sections for more information:
To know how to configure a Group for Daylight harvesting, click here
To know about Daylight harvesting using Open Loop mode, click here
To know about Daylight harvesting using Closed Loop mode, click here
To know about Daylight harvesting using Custom mode, click here
To know about Automated Demand Response, click here
To know about Human Centric Lighting, click here