Configure 'Output Channel Settings' of Radiar AR10

1. Go to the 'Devices' tab
2. Click on the  icon of Radiar AR10
3. Select 'Additional Settings' and choose 'Output Channel Settings'
   
4. You can select the output channel mode as:
   1. Single Channel + Relay: Choose this option as the output channel mode if only one channel of the controller/driver is connected. The second channel will act as an external relay input. This mode will support On/Off and intensity control of the device. This is the default output channel mode for the controllers.
   2. Driver-Based Color Tuning: Choose this option as the output channel mode if both channels of the controller are connected and when the connected driver has the capability to perform color tuning. This mode will support On/Off, intensity, and CCT control.
   3. Controller-Based Color Tuning: Choose this option as the output channel mode if both controller channels are connected and when the connected driver does not have the capability to perform color tuning. In this mode, the controller will perform color tuning. This mode will support On/Off, intensity, and CCT control.
   4. 2 Single Channels: Choose this option as the output channel mode if both channels of the controller/driver are connected to control the intensities of two individual luminaires independently. This mode will support On/Off and intensity control through both controller channels.
   5. Relay: Choose this option as the output channel mode if the controller set up needs to behave as a plug load control or if you only want it to perform On/Off operations.

You can also visit the following sections for more information:
To understand how to configure 'Light Configuration Settings', click here
To understand how to configure 'Device Power Settings', click here
To understand how to configure 'Device Configuration Settings', click here
To understand how to configure 'Input Sensor Settings' of Radiar AR10/AF10, click here
To know how to commission Sensor, click here
To commission Catron IV, click here
To commission Gateway in Wi-Fi mode, click here
To commission Repeaters, click here