Create Duration Tests from the Web UI

Duration Tests in Manual Mode

1. The test type and test mode should be configured as Duration Test and Manual mode, respectively
   
   
2. Choose Target Devices: The target devices can be chosen from the required Floor and Zone. The target can be a group or device and can be chosen as desired. The groups with at least one emergency light will be listed when ‘Group’ is selected. The child device can be chosen on selecting the ‘Device’ option
   
   
3. Once you have selected the target devices, you can click on the 'Next' button and do a review of the test configured
   
   

Duration tests in Automated Mode

1. Duration tests can also be automated to run at required intervals of time. The test type and test mode should be configured as Duration Test and Automated, respectively. The Date, time and the interval of the test can be set
   
   
2. Choose Target Devices: The target devices can be chosen from the required Floor and Zone. The target can be a group or device and can be chosen as desired. The groups with at least one emergency light will be listed when ‘Group’ is selected. The child device can be chosen on selecting the ‘Device’ option
   
   
3. Once the targets have been chosen, click on 'Next' to review the test configuration and verify
   
   

You can also visit the following sections for more information:
To know how to configure Emergency Test Settings, click here
To know how does the Lumos Controls BMS integration work, click here